Proudly Australian built and designed around a solid steel construction. This streamline standard Projector mount comes fully assembled out of the box ready for mounting. The flat steel base has 6 pre-drilled holes ready for all fastening systems. The projector mounting head has been designed to fit virtually all brands and models of projectors. With a total of 20° lateral and 25° of tilt this mount has been designed for the straight forward room installation.
Complementing this is the advantage of up to 3m of drop available using our Extension pole – part code EXP available in 1m, 2m & 3m lengths
Universal Data Projector Mount
Proudly Australian built and designed around a solid steel construction. Our Universal Projector mount comes fully assembled out of the box ready for mounting. The projector mounting head has been designed with 20° of lateral and 25° of tilt to fit virtually all brands and models of projectors.
The Base has been designed for the difficult room installation eg: False ceilings, I beam’s, exposed rafters and other architecturally designed ceilings. The base adjusts 180° vertically and 360° horizontally enabling it to mount to a surface of any angle and tilt.
Complementing this is the advantage of up to 3m of drop available using our range of Extension poles refer to EXP description.
Data Projector Cage Large & Small
Having a security cage gives the owner piece of mind the Data Projector will be there in the morning. The Cage includes the STDM mounting system and all its advantages. The cage has a spot welded steel construction with a locking bar that can be placed Centre, Left or Right allowing for all Lens offsets. Utilizing a unique designed Sheer Nut to secure all parts of the cage once installed the only way in is via the padlocked opening with the key or grinding and cutting equipment.
Short Throw Wall Mount
This universal wall mount is over engineered for its purpose and is extremely strong. The wall mounting plate is 10mm thick 120mm wide and 400mm long. The 1525mm tube is 50.8mm round and 2mm thick. The reasoning behind its strength is once installed your Data Projector will be as stable as possible even in portable classrooms or high vibration areas.
Extension Pole
Extension Pole to Suit STDM, UNIM & DPCAGE 1, 2 & 3 meters in length
The Extension Pole is used when the length of the STDM, UNIM or DPCAGE is not long enough.
This pole is sold in lengths of 1, 2 & 3 m. It has an internal diameter of 39mm allowing for all your cables to be run down the inside of the extension for a clean streamline appearance.
The pole is designed to be cut to length on site for fine tuning or have your installers buy 3m lengths to cover any situation that may arise
